ENQUIRIES: 01352 781621
0

Steelroll S76

Applications - High security commercial sites. Punched (V76) & perforated (P76) slats can be incorporated as required for full or partial vision. This page details the S76 with tubular motor.

Curtain Slat - Single skin 76mm (3'') curved steel. Wall thickness of 0.7mm, 0.9mm or 1.2mm. 
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour or
Plastisol finish (surcharges apply).
Visible Surface :: 76mm
Profile Height :: 86.6mm
Weight per m² :: 9.8kg / 12.5kg / 16.7kg (depending on wall thickness)
Maximum Width :: 7000mm
Maximum Surface :: 29m²

Enclosure / Housing - Manufactured from galvanised steel sheet. End caps are fabricated from steel.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies).
Guide Height (mm)      Plate Size* (mm)
            2695                          305
            4000                          355
            5000                          400
*These sizes apply to standard shutter roll methods only. Reverse rolled curtains will require larger boxes than those shown. Plate sizes shown as a guide only and may increase dependent on shutter width.

Guide Channels / Bottom Slat - Galvanised steel section bottom rail: either 'L' or 'T' shape. Guide channel depth will vary dependent on application, either 50mm, 65mm, 75mm or 100mm. Windlock guides available for 65mm.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies).
Guide channels are bolted onto angle or box section, depending on the application. 

Operation - Electric: Tubular or three phase outboard motor. NRG Econom tubular motor with internal rocker or external key switch as standard. GfA & Ranger three-phase motors with push button control as standard and direct drive, inboard or outboard design.Manual override facility as required (surcharge applies). 
Numerous control option variants including timed closure, group, remote control or mobile phone activation. 

Note: Manual spring & lock operation is also available with the S76


Steelroll_S76_Steelroll_S76_