ENQUIRIES: 01352 781621
0

Steelroll V76


Applications - Commercial sites, for openings up to 49m². The V76 offers full or partial vision while retaining the durability and security of the regular solid shutter curtain. Solid slats can be incorporated as required. CE marked  to harmonised product standard BSEN 13241-1:2003.

Curtain Slat - Single skin 76mm (3'') curved steel standard galvanised finish. Wall thickness 0.7mm, 0.9mm, or 1.2mm, depending on overall shutter opening width. 
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour or Plastisol finish (surcharges apply).

Visible Surface :: 76mm
Profile Height :: 86.6mm
Weight per m² :: 8.3kg / 10.6kg / 14.2 kg (dependent on wall thickness)
Maximum Width :: 1200mm
Maximum Surface :: 29m² with single phase power or 49m² with 3-phase power.

Enclosure / Housing - Manufactured from 0.7mm or 0.9mm galvanised steel sheet. End caps are fabricated from 3mm steel.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies).

TUBULAR MOTOR:
Guide Height (mm)       Plate Size* (mm)
            2695                           305
            4000                           355
            5000                           400
OUTBOARD MOTOR:
Guide Height (mm)       Plate Size* (mm)
            6000                           400
            6000                           550
*These sizes apply to standard shutter roll methods only. Reverse rolled curtains will require larger boxes than those shown.  Plate sizes shown as a guide only and may increase dependent on shutter width.

Guide Channels / Bottom Slat - Galvanised steel section bottom rail: either 'L' or 'T' shape. Guide channel depth will vary dependent on application; either 50mm, 65mm, 75mm or 100mm. Wind guide option available for 65mm guides.
Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies).

Guide channels are bolted onto angle or box section, depending on the application.

Operation
Electric: Tubular Motor = NRG Econom tubular motor & internal rocker or external key switch as standard (range of other motors available for a surcharge). Safety brake as appropriate to comply with legislation. Manual override facility & crank handle as required (surcharge applies). Numerous control option variants such as group, remote or mobile phone activation.
Outboard Motor = GfA Safedrive & Ranger three phase motors with TS959 push button control station as standard. Motors can be direct drive, chain drive or in-line design. Final configuration will be project specific but all motors incorporate a chain manual override facility as standard. Numerous control option variants such as timed closure, group, remote or mobile phone activation.
Note: Manual operation is available but not common with the V76; manual operation is advised for window shutters only. 



Steelroll_V76Steelroll_V76